Disc Makers KDC-W7027 User Manual download pdf (Page 16)

English

General features

External Display Switching

Switching the display in the External Display

connected.

1 Select the key function section

Press the [NEXT] button.

Repeatedly press the button until "DISP" is

displayed above the [3] button.

Refer to 'Notes on Multi-function Key System'

(page 9).

2 Enter display control mode

Press the [3] ("DISP") button.

3 Select the display

Press the [4] ("OUT") button.

"OEM DISP" is displayed.

Each time the button is pressed the display

switches.

4 Exit display control mode

Press the [6] button.

Auxiliary Input Display Setting

Selecting the display when this device is switched

to Auxiliary input source.

1 Select Auxiliary input source

Press the [SRC] button.

Select the "AUX" display.

2 Enter Auxiliary input display setting mode

Press the [NAME.S] button for at least 2

seconds.

The presently selected AUX Name is blinks.

3 Select the Auxiliary input display

Press the [4] or [¢] button.

Each time the button is pressed it switches

through the below displays.

• "AUX""

• "TV"

• "VIDEO"

• "GAME"

• "PORTABLE"

• "DVD"

4 Exit Auxiliary input display setting mode

Press the [NAME.S] button.

• When operation stops for 10 seconds, the name

at that time is selected, and Auxiliary input display

setting mode closes.

• The Auxiliary Input Display can be set only when the

built-in auxiliary input or the auxiliary input of optional

KCA-S210A is used.

Panel Position Setting

Setting the angle or back-forward position of the

control panel.

1 Select the key function section

Press the [NEXT] button.

Repeatedly press the button until "PNL" is

displayed above the [4] button.

Refer to 'Notes on Multi-function Key System'

(page 9).

2 Enter Panel Position Setting mode

Press the [4] ("PNL") button.

3 Select the item for adjustment

Press the desired [2] — [5] button.

Each time the button is pressed the items that

can be adjusted switch as shown below.

Adjustment Item Button Display

The panel tilts upwards. [2] "ANG–"

The panel tilts downwards. [3] "ANG+"

The panel slides backward. [4] "SLD–"

The panel slides forward. [5] "SLD+"

4 Exit Panel Position Setting mode

Press the [6] button.

• The control panel may be interfered with the shift

lever or another part depending on the angles of the

control panel.

Set the angle to avoid any interference.

• When a hard rubber frame is mounted

Do not use with the panel slid in the forward

direction.

If so, the hard rubber frame will interfere with the

panel when the angle is adjusted downward.

• No sound is produced while the panel is operating.

B64-2750-00_U.S(E).Indd 16 03.11.27, 3:37:49 PM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Comments to this Manuals

No comments

Disc Makers KDC-W7027 User Manual Page 16

Comments to this Manuals