Disc Makers KDC-W7027 User Manual download pdf (Page 32)

English

Menu system

In Standby mode

Security Code

Because authorization by the Security Code is

required when it’s removed from the vehicle,

personalizing this unit is by using the Security

Code is a help in preventing theft.

• When the Security Code function is activated it can’t be

released.

Note, your Security Code is the 4 digit number entered in

your "Car Audio Passport" in this package.

1 Enter Standby

Press the [SRC] button.

Select the "STANDBY" display.

2 Enter Menu mode

Press the [MENU] button for at least 1 second.

When "MENU" is displayed, "Security" is displayed.

3 Enter Security Code mode

Press the [4] or [¢] button for at least 1

second.

When "ENTER" is displayed, "CODE" is displayed.

4 Select the digits to enter

Press the [4] or [¢] button.

5 Select the Security Code numbers

Press the [FM] or [AM] button.

6 Repeat steps 4 and 5, and complete the

Security Code.

7 Confirm the Security Code

Press the [¢] button for at least 3 seconds.

When "RE-ENTER" is displayed, "CODE" is

displayed.

8 Do the step 4 through 7 step operation, and

reenter the security code.

"APPROVED" is displayed.

The Security Code function activates.

• If you enter a Code different from your Security Code,

you have to start over from step 4.

Press the Reset button and when it’s removed

from the battery power source

1 Turn the power ON.

2 Do the step 4 through 7 step operation, and

reenter the security code.

"APPROVED" is displayed.

The unit can be used.

• If an incorrect code is input, "WAITING" is displayed,

and the input prohibited time shown below is

generated.

After the input prohibited time lapses, "CODE" is

displayed, and input can be done.

Number of times the

incorrect code was input

Input prohibited time

1—

25 minutes

31 hour

4 24 hours

When hands free unit connecting; In Standby

mode

Phone voice speaker setting

Selecting the speaker to output the Phone voice.

Display Setting

"HFSP ALL" Phone voice sent to the front and rear speaker.

"HFSP FR" Phone voice send to the front right speaker.

"HFSP FL" Phone voice sent to the front left speaker.

When hands free unit connecting

Microphone sensitivity adjust

Adjusting the volume of the Microphone.

Display and Setting

"HF MIC 0"

…

"HF MIC 15" (Original setting)

…

"HF MIC 31"

B64-2750-00_U.S(E).Indd 32 03.11.27, 3:38:22 PM

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Comments to this Manuals

No comments

Disc Makers KDC-W7027 User Manual Page 32

Comments to this Manuals