Disc Makers 1.1 User Manual download pdf (Page 26)

Processing...

Please Wait

The loader will continue to remove discs from the input spindle and place the

into drives until

either all of the drives are full, or the count that you loaded into the counter is reached.

It takes a few seconds

for the

autoloader

to recognize all the discs.

system

will

then

compare the discs in the trays to the

content of the

master disc residing

in the

Hard Drive partition you specified

. When the comparison

job

is complete, the

autoloader

will

place

the

ood discs

and failed discs into corresponding area

and

you will see a PASS/FAIL

result

screen similar to this:

Counter Specified

No Counter Specified

PASS 16 FAIL 0

Job Completed!

Press OK to Finish

or:

Input Bin Empty

Reset Hoppers?

PASS 16 indi

cates 16 discs

have

been

compared

successfully

FAIL 0

indicates

none of the discs

have

failed

Press the

ENT/

Enter

button to finish

Input Bin Empty

indicates that the

system has run out of discs to

compare.

If you have more discs to compare, yo

can empty the Output

Spindle;

place

the discs to be compared in the Input

Spindle

and Press the

ENT/

Enter

button to continue.

If you have no more discs to compare,

press

the

ESC

/Escape

button to

terminate the operation.

4. Test+Copy

With the Test

+ Copy menu option, the autoloader

simulates the copying process, and then

makes copies if everything works correctly. If a

failure

is encountered

on a disc

during the

simulation,

it will not be copied during the copying process

. T

he discs that passed the

simulation

will

move on to the copying process. If any part of this process fails, the job will be aborted.

Operation in

Test+Copy

is identical to operation in

Copy

. See Copy on p

age 1

for

instructions.

5. Copy+Compare

The

Copy + Compa

menu option is used to make verified copies. After the copy process is done,

the

autoloader

automatically compares the

copies to the master content resid

ing

in the h

ard

drive

to ensure that they are identical. When the operation is complete, the

autoloa

der

automatically

places good disc

s on to the O

utput

Spindle

If any part of this process fails, the job will be aborted.

Operation in

Copy+Compare

menu is identical to operation in

Copy

menu. See Copy on

page 1

for instructions.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Comments to this Manuals

No comments

Disc Makers 1.1 User Manual Page 26

Comments to this Manuals