Disc Makers ReflexMax1 User's Guide download pdf (Page 6)

2. Load the top drive (reader) with the master disc and load the lower drive

(writer) with high-quality blank DVD-R, DVD+R, or CD-R media.

3. Press the ENT button to start the process. The unit will analyze the master

disc, and the source disc. This may take a few moments.

Upon successful testing the following will display on the LCD.

If the blank target disc in the writer drive has already been written to, or is

damaged and cannot be written to, the LCD will display the message: Target

Drive Not Ready. If the data on the master disc will not fit on the blank target

media, the LCD display will read Target Overflow.

3. TEST AND COPY

The Test and Copy Function incorporates the first two functions into one oper-

ation. It is used to check whether a disc will successfully copy and then contin-

ues on with the duplication process. First, the copy process is simulated and

then the data is copied to the recordable media.

1. Select the function using the UP and DOWN arrows.

2. Load the top drive (reader) with the master disc and load the lower drive

(writer) with high-quality blank DVD-R, DVD+R, or CD-R media.

3. Press the ENT button to start the process. The unit will display Test The

Master Disc, then check the target disc, and finally copy to the blank record-

able media.

Upon successful testing and copying the following will display on the LCD.

If the blank target disc has already been written to, or is damaged and

cannot be written to, the LCD will display the message Target Drive Not

Ready. If the data on the master disc will not fit on the blank target media then

the LCD display will read Target Overflow.

4. VERIFY

The Verify Function is used to confirm that the master and the copy read the

same after the duplication process is completed.

1. Select the Verify Function using the UP and DOWN arrows.

2. Load the top drive (reader) with the master CD and load the lower drive

(writer) with the CD-R that has been copied.

3. Press the ENT button to start the process.

Upon successful verification the following will display on the LCD and the

recorded media will be ejected. To verify another disc, place the next disc in the

writer drive and press the ENT button.

If the verification was unsuccessful, the following will display:

5. COMPARE

The Compare Function takes the Verify Function one step farther—it gives

details about the master and recorded disc. It also ejects the recorded disc

upon a successful comparison.

1. Select the Compare Function using the UP and DOWN arrows.

1-888-800-4041 www.discmakers.com

Functoins

Test

OK: 01

Test and Copy

OK: 01

Verify

OK: 01

Verify F->

Fail: 01

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Disc Makers ReflexMax1 User's Guide Page 6

Comments to this Manuals

Related products and manuals for Media duplicators Disc Makers ReflexMax1